Heatpunk App These guides walk users through how to use the Heatpunk App - from connecting your device and creating your first survey, through to uploading this survey to your Heatpunk Pro account. Available now on the App Store. 1. Getting started & connecting your device To survey properties on site using the Heatpunk App, you first need to install it and link it to your Heatpunk Pro account . You only need to do this once per device . What you need A Heatpunk Pro account: The app can only connect and send surveys to a Heatpunk Pro account An iPhone or iPad: Running iOS 26 or later. (Note: LiDAR Scan requires an iPhone 12 Pro or newer Pro model, or an iPad Pro . All other compatible iPhones can use AR Measure ) A device passcode: Required so the app can securely store your account key A computer: To log into the Heatpunk web portal and generate your connection QR code Internet connection: Required only to connect the app and upload completed surveys . You can carry out full surveys completely offline Note: You can connect up to 2 devices to a single Heatpunk account . 1. Download the app & allow permissions Open the App Store on your iPhone or iPad, search for Heatpunk , and tap Get . Open the app and tap Allow when prompted for Camera access (required to scan rooms and read your QR code) . When prompted later during surveys, allow Microphone and Speech Recognition (to dictate room notes — recordings stay locally on your phone) and Photos (to save floor plan images) . 2. Generate your QR code on a computer Log in to heatpunk.co.uk  on a computer and go to My Account > Preferences > Heatpunk App . Under Set up the app , enter a name for your device (e.g., Survey iPhone 1 ), click Get QR code , and click OK . Keep the Connect Heatpunk QR code window open on your screen . Warning: Your QR code is displayed only once . Do not share it, as anyone who scans it can view and edit your projects .   3. Scan the code to connect On the app's Connect to Heatpunk screen, tap the round blue QR button at the bottom right . Point your camera at the QR code on your computer screen . Once verified, the app will automatically open the Home screen . You can now click Done on your computer . ​ Expand the sections below for information on issues related to connecting your device Already have 2 devices connected? If the website says "You can add up to 2 devices," go to Your devices on the website and click Remove next to a device you no longer use . That device will no longer be able to send surveys until you reconnect it with a new QR code . What if the app shows a red error message when connecting? "That QR code isn't a Heatpunk key.": You scanned a different QR code—point the camera at the code under My Account > Preferences > Heatpunk App on the website "Heatpunk did not accept this key.": The code was removed or already used—generate a new QR code on the website and scan it "Connecting needs a connection.": Your device has no signal—try again once you have mobile signal or Wi-Fi "Set a passcode on this iPhone to connect.": Add a device passcode in your iPhone's Settings , then generate and scan a new QR code "Camera access is off.": Turn on camera access in your device's Settings > Heatpunk , then try again Navigating the Home screen & Settings Tabs: Switch between Home , Surveys , and Search at the bottom of the screen (or via the sidebar on iPad) Start a survey: Tap + at the top right to begin a new survey Settings: Tap the gear icon at the top right to check your connection status, set your default Ceiling Height (2400 mm default), toggle Snap Walls Square , manage iCloud Copy backups, or tap Clear Scans Already Sent to free up phone storage       Not backed up to iCloud? If your Home screen shows Not Backed Up to iCloud , your surveys are stored only on your phone . Tap the card to open your iCloud Copy settings . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 2. Starting a new survey Before scanning rooms, set up the property details, measurement method, and ventilation settings . 1. Create the survey From the Home screen, tap + (or + New Survey ) . Enter the full UK postcode (e.g., CB24 1AB ) . This is the only mandatory field to begin . Optionally enter the Address , Project Name (defaults to the postcode if left blank), Customer contact details, and the House Built era ( Before 2000 , 2000-2006 , or After 2006 ) . Tap Start at the top right . 2. Choose your measurement method You choose one measurement method for the entire survey, then tap the blue arrow at the bottom right to continue . ​ Expand the sections below for information on which measurement mode to choose LiDAR Scan (iPhone Pro & iPad Pro) Compatible devices: iPhone 12 Pro or later Pro models, and iPad Pro How it works: Walk slowly around each room (~1 minute per room); walls, doors, windows, and a 3D model are detected automatically Best for: Most rooms that are quick, furnished, and have ordinary shapes Watch out for: Mirrors, large expanses of glass, and very dark rooms AR Measure (Any compatible iPhone) Compatible devices: Any compatible iPhone How it works: Aim the screen ring at and tap each floor corner, ceiling height, door, window, and radiator (2–3 minutes per room) Best for: Lofts, awkward shapes, rooms a LiDAR scan gets wrong, and phones without LiDAR Watch out for: Plain shiny floors and dim lighting 3. Pick your starting floor Select the floor you want to survey first ( Ground floor is selected by default, though you can scan floors in any order) . Skip Attic unless it is a converted habitable space, and only select Basement if it is heated . Once the green Sensor ready (or Camera ready ) indicator appears, tap Start . 4. Complete Before You Start Configure these four settings before the camera opens : Property type: Tap Property type and pick Detached , Semi-detached , End of terrace , Mid-terrace , or Flat (used locally to prompt you for shared party walls) . Materials palette: Tap Materials palette and select one of your Heatpunk account palettes or Blank palette (standard materials) . Ventilation losses: Tap Ventilation losses , choose Standard (MCS) (12 m³/(h·m²) at 50 Pa) or Measured Air Permeability (if an air tightness test was performed), select the wind shelter ( Intensive , Normal , or None ), and tap the blue tick . When to Survey the Outside: Choose Before the Rooms to answer external survey questions first (Property Details, Access, Heat Pump Location, Wiring, and Pipe runs), or After the Rooms to jump straight into scanning . Tap Start (or Start Scanning if you completed outside questions first) to begin .         Warning: If the app warns that your phone has less than 1 GB of free space, clear some storage before scanning or you risk losing what you record . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 3. Scanning & measuring rooms (LiDAR & AR) Each room is measured one at a time and automatically joins onto your floor plan .   Tips for a clean scan Close internal doors and turn on lights: Open doors can cause LiDAR to merge two rooms into one Ignore furniture: Sofas, tables, and kitchen units are automatically filtered out—only walls, doors, windows, and radiators are sent to Heatpunk Keep the phone held up between rooms: Moving with the camera upright helps the app track your position so the next room snaps neatly beside the previous one Method A: Scanning with LiDAR Stand close to a wall, point the phone at it, and tap the round blue button at the bottom . Walk slowly around the perimeter (roughly one step per second), sweeping the camera from floor to ceiling across every wall, door, and window . Mark radiators (optional): Tap directly on any radiator on your screen while scanning to place a marker on the nearest wall . Once you have scanned all walls (and at least 3 walls are detected), tap the round blue button again to finish and open the Room Steps . Warning: Tapping X at the top left immediately ends the current scan without asking for confirmation, and the room you are scanning will not be saved . Method B: Measuring with AR Measure Move your phone slowly over the floor until the dotted grid appears . Aim the centre ring at a floor corner and tap Corner . Repeat around the room, then aim back at the first corner and tap Corner again to close the room . Set Ceiling Height: Switch to the Height tab, aim where a wall meets the ceiling above a corner, and tap Set (or tap Same as last room ) . Add Doors, Windows & Radiators: Use the Door , Window , and Radiator tabs at the bottom to aim and tap opposite corners or edges for each opening or radiator . Tap Done at the top right (use Undo at the top if you misplace a point) . Moving between rooms & troubleshooting Next room or floor: After completing a room's steps, tap Next Room to keep scanning, or tap More > Next Floor when a floor is finished Rescan or add a missed room: Tap ... > Rescan Room or ... > Add a Missed Room ​ Expand the sections below for information on issues while scanning What if the phone loses its place during a scan? A phone call, screen lock, or switching to another app can cause the phone to lose track of its position . Your previously completed rooms remain saved, though the room you were actively scanning must be measured again . Find your place: The screen displays a photo of where your last scan finished . Walk back there and point the camera at the walls of a room you already scanned until the phone buzzes and Scan This Room reappears . Or tap Place by Hand : If the phone cannot re-lock onto a previous room, tap Place by Hand at the bottom and scan the room as normal . Drag the room into place: After scanning, the floor plan opens so you can drag the room into position (it snaps automatically to surrounding walls) . Use Turn to rotate it, or Line Up Door to align a shared doorway, then tap Place at the top right . Common messages while scanning or measuring LiDAR Scan messages: "Your phone is hot. Give it a minute to cool down.": Stop between rooms for a minute to let the device cool down, then carry on "The phone is low on memory. Finish this room soon.": Stop the current scan soon so the room saves properly "This room is taking a while.": Stop here and scan the remainder of the space as a separate room "That scan is of a room already on this floor.": Walk into the next unmeasured room before starting the scan "The scan stopped." / "The phone lost its place." / "This scan got too big.": Your previously completed rooms are saved—scan the current room again AR Measure messages: "Move your phone slowly over the floor": The app has not detected the floor plane yet—keep moving the camera slowly "Get closer / Aim at the floor": Move nearer to the corner and angle the camera lower "More light, or aim at something with a pattern": Turn on more lights—plain, shiny floors are difficult for the camera to track "That wall would cross another": The corner was placed in the wrong spot—tap Undo and try again "Point back at the last corner you placed": The phone lost tracking—aim back at the previous corner to re-lock ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 4. Completing room details, radiators & photos Immediately after scanning a room, a 5-step card workflow opens at the bottom of the screen (or in the right-hand panel on iPad) . Room type, name & shape (Step 1 of 5) Room Type & Name: Tap Room Type and select the room's function (Heatpunk uses this to set design room temperatures; select Unheated if the room has no heating) . Optionally add a Custom Name (e.g., Front Bedroom ), then tap Continue . Check the Shape: Compare the room outline against the real room . Drag corner dots to adjust angles or wall dots to move walls, or tap a wall to type its exact length in mm . Tap Looks Right to continue . Radiators (Step 2 of 5) Every radiator must have a measured size before you send the survey to Heatpunk . Tap + Add Radiator (or tap a radiator you marked during the LiDAR scan) . Choose how to record its dimensions: Tap the Radiator (LiDAR only): Point the camera at the middle of the radiator to auto-measure, then tap Use This Tap Two Corners (LiDAR only): Aim at two opposite corners with the camera Enter Manually : Select the wall, pick the radiator type, and enter Width and Height in mm Tap Add Photo on the radiator row to photograph the TRV, lockshield, pipe tails, and any nearby plug socket . Tap Continue (swipe left on a radiator row to Delete it) . Warning: Every radiator must have a measured size before you send the survey—Heatpunk will leave out any radiator that has no size . In This Room (Step 3 of 5) Verify the Ceiling Height in mm . If applicable, tap Stopcock is here or Boiler is here to take a photo . If the scan detected a fireplace, specify whether its chimney is open ( No flue , Flue with a throat , or Flue with no throat ) . Answer any room-specific prompts (such as vents, hot water cylinder, or consumer unit) by tapping Here (to take a photo) or Not Here , then tap Continue . Photos & Notes (Steps 4 & 5 of 5) Photos (4 of 5): Tap Take Photos to capture general room photos, then tap Done . Notes (5 of 5): Type notes into the text box, or tap Tap to Dictate to record a voice note . Tap Done to finish the room, then select Next Room or More . Need to skip a step? You can tap Skip on Steps 2–5 to come back later . Any skipped items are automatically flagged in Before You Leave before you upload the survey . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 5. Editing the floor plan & aligning floors You can view and refine your floor plan at any time by tapping the Plan (map) icon during a room walk, or tapping Open next to Floor Plan on the survey's page .   Understanding floor plan colours Thick black wall: External wall (heat loss boundary) Thin grey wall: Internal partition wall between two scanned rooms Dark blue line: Door Light blue line: Window Orange edge: Room still needing a Room Type Orange bar: Radiator (solid once sized; pale and dashed if unmeasured) Moving, rotating & squaring up rooms Move a room: Tap a room to select it, then drag inside it—it will snap automatically to neighbouring rooms Rotate a room: Drag the round blue handle above a selected room, or tap Square Up on the room card to straighten walls that are slightly off-square Move multiple rooms: Tap Select at the top right, tap each room you want to group, and drag or rotate them together Rotate the whole floor: With no room selected, use Rotate or Turn 90° on the bottom card Editing a room's shape & wall boundaries Select a room and tap Edit to open the Room Editor . Reshape walls: Drag pink corner squares (fixed angle), pink circles (free angle), or pink wall bars . Drag a small teal dot to add a new corner, or tap any wall length to type an exact measurement in mm . Set What's Behind each wall: Tap a wall (or open Walls in the card list) and set What's Behind to Outside , Heated , Unheated (e.g., an attached garage), Ground , or Neighbour's Home (essential for semi-detached and terraced party walls) . Tap the blue tick at the top right to save . What do the different "What's Behind" wall options mean? Outside : The wall is an external wall (this is the default for unshared walls) Heated : Another heated space is on the other side Unheated : An unheated space is on the other side, such as an attached garage Ground : Earth is on the other side, such as a basement retaining wall Neighbour's Home : The wall is a party wall shared with an adjoining property—be sure to set this on semi-detached or terraced houses so Heatpunk does not treat it as an external heat-loss wall                           Adding or editing doors, windows & radiators Add: Select a room, tap + Add , and choose Door , Window , or Radiator . Enter the dimensions and wall, then drag it into position Edit: Select a room, tap the door, window, or radiator on the plan, and use the card to adjust dimensions, toggle Plug socket nearby (for radiators), or nudge its position in 10 mm increments Add a missed room: With no room selected, tap Add Room , choose the room type, and select Scan It (LiDAR), Measure with Taps (AR), or Enter Size (manual rectangle) Lining up multiple floors If the property has two or more floors, you must align them before sending the survey . Open the floor plan with no room selected and tap Line Up (or select ... > Line Floors Up on the survey page) . Tap Auto Align to snap the upper floor over the floor below (shown in blue) . Fine-tune using drag, Nudge 50 mm , or Rotate if needed . Tap Aligned at the top right . Warning: Always tap Aligned rather than Back when you finish aligning floors—tapping Back keeps your position changes but will not mark the floors as aligned for upload . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 6. Drawing floor & ceiling regions, rooflights & dormers By default, Heatpunk assumes the lowest floor sits on the ground and the highest ceiling is a standard flat roof . You only need to use the Floor and Ceiling layers when part of a property differs—such as a room over an unheated garage, a suspended timber floor, a flat roof extension, or a room in the roof . For more background on how regions work on the web, see the Floor and ceiling regions  guide in the Plans task . Warning: Regions on the same layer must not overlap by more than 0.5 m², or you will not be able to send the survey . Adding a floor or ceiling region Open the floor plan, select the relevant floor at the top, and toggle the top switch from Rooms to Floor (between this floor and the floor below) or Ceiling (between this floor and the floor above) . Tap + Add > Region . Drag the region and use its corner and edge handles to snap it over the relevant area . On the region card, select the Material build-up and set Other side? ( Ground , Outside , Unheated Space , or Heated Space ) . Drawing a sloped ceiling (room in the roof) On the Ceiling layer, draw a Region covering the sloped portion of the ceiling . Select the region, tap a corner dot , and enter the ceiling height at that corner in mm . Tap the tick to confirm . Repeat for the remaining corners—a red arrow will appear on the plan pointing down the slope . (All corner heights must form a single flat plane .) Adding rooflights and dormers Rooflight: On the top floor's Ceiling layer, tap + Add > Rooflight , drag it onto the roof region, and set its glazing material, Aspect ( Plan or Roof ), and dimensions in mm Dormer: First draw the sloped ceiling region, then tap + Add > Gable dormer or Shed dormer . Drag it wholly inside the sloped ceiling region, enter the roof and wall materials, gutter height ( A ), and ridge height ( B ), then tap the dormer window strip to set the window size Adding a material not in your palette If a wall, floor, roof, or window build-up is missing from your dropdown list, scroll to the bottom and tap + Add material to search Heatpunk's full material library and add it to the current survey . Note: Adding a material via + Add material adds it only to the current survey—it does not change your saved palettes on the Heatpunk website . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 7. Survey questions & photo markups The app includes all 14 standard Heatpunk survey sections . You can complete them on site without signal, and your answers save automatically . Answering survey questions Open the survey's page and tap the Survey Questions card (or tap ... > Survey during a room walk) . Tap Start or Continue to work through the remaining sections in order, or tap any individual section from the list . For photo questions, tap Take Photo to capture a new image, or From Project to reuse a photo you already took during the room walk . Tap Photos Still Needed at the top of the Survey Questions screen to view a checklist of any missing photos . List of the 14 survey sections Property Details (Outside) Access (Outside) Proposed Heat Pump Location (Outside) Existing Heating System Heat Emitters Inside pipework Domestic Hot Water Supply Proposed cylinder location Energy Use Electrical System Wiring route (Outside) Pipe runs (Outside) Vents (optional) Additional information Marking up photos & drawing pipework You can annotate photos to clearly show installers where equipment, pipe runs, and cables will go . Tap any photo to open it full-screen . General annotations: Tap Mark Up to draw freehand or add shapes and text using Apple's markup tools, then tap Done (a clean original is always preserved in the background) . Pipework & cable routing (available on survey question, radiator, boiler, and stopcock photos) : Tap Pipework at the bottom right Tap Route , select the pipe or cable type ( Flow & Return , Hot Water , Cold Main , Condensate , Power Cable , Controls Cable , etc.) and diameter (e.g., 22 mm ), then tap along the photo to plot each bend and tap Finish Tap  Mark to place icons for Heat Pump , Core Hole , Cylinder , Isolator , Consumer Unit , Valve , or a Note Tap Done at the top right to save the annotated image Note: Deleting a photo from a room removes it from the entire survey and any linked questions . Deleting a photo from a survey question removes it only from that question . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 8. Confirming house materials (Fabric) Before leaving the property, review and confirm the default construction materials for the whole house . To manage your saved palettes on the web, see the Material library and palettes  guide in the Plans task . Confirming whole-house materials On the survey's page, scroll down to House and tap Walls, Floors & Windows (marked Not Confirmed in orange) . Review each category and its U-value: Walls: External walls , Internal walls Floor and roof: Ground floor , Intermediate floor , Roof Glazing and doors: Windows , Doors Tap any row to change its build-up—changing a material here updates every room in the survey unless you have overridden a specific wall or window individually . Tap Confirm fabric at the bottom right . Note: If you change a material after tapping Confirm fabric , the fabric status resets to unconfirmed—remember to tap Confirm fabric again before leaving . Overriding a single wall or window If an extension or specific wall is built differently from the rest of the property: Open the wall in the Room Editor (or during Step 1 of the room walk) . Tap Built Of and select the new material . When prompted, select Just This Wall (selecting Change Every Outside Wall updates the whole house) . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 9. Checking & sending your survey to Heatpunk Once your rooms, floor plans, and survey questions are complete, run a final check before uploading the project to your Heatpunk account . 1. Review Before You Leave Tap More > Finish Survey after your last room, or tap Send to Heatpunk on the survey's page . Review the floor plan for each floor and tap Next at the top right to open Before You Leave . Any missing items are grouped into three sections : Needed to Send (Blocking): Issues that must be resolved before uploading (e.g., unaligned floors, a room missing a Room Type, a radiator with no size, overlapping regions, or a dormer extending outside a sloped roof) . Tap any row or tap Fix Now to jump straight to the fix Needed for an Accurate Heat Loss (Warning): Non-blocking reminders (e.g., unconfirmed fabric materials, an unanswered fireplace flue, or a missing party wall) Survey Answers and Photos (Warning): Lists any unfinished survey sections Common "Needed to Send" errors and how to fix them "[Room] needs a type": Open the room and assign a Room Type "A radiator in [Room] has no size": Type or camera-measure the radiator's dimensions "The floors are not lined up": Align your floors on the floor plan and tap Aligned at the top right "Regions overlap by ... m²": Move or reshape your floor or ceiling regions so they do not overlap "This dormer is not fully contained in a sloped roof": Move the dormer completely inside a sloped ceiling region "The project details are missing": Open ... > Edit Details and add the full postcode and house build era "How sheltered the house is from the wind": Select a wind shelter option on the Ventilation screen "The measured air permeability": Enter the air tightness test result on the Ventilation screen 2. Send the survey Tap Send to Heatpunk (or Send Anyway if only non-blocking warnings remain) . Keep the app open while your rooms and photos upload . When complete, the Survey sent receipt screen displays your unique Reference (e.g., #HP-10482 ) - quote this reference if you ever need Heatpunk Support to look up the upload . Tap Done . Your project is now ready in your Heatpunk web account . 3. Making changes after sending Updated survey answers or photos: Open the survey's page and tap Send Update on the Survey Questions card to update the existing project in Heatpunk Updated floor plan, rooms, or property details: Tap Send Again on the survey's page Note: Heatpunk never overwrites an existing floor plan once sent . Tapping Send Again creates a second project in your web account (defaulting to the name Postcode (revised) ) . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour. 10. Managing surveys, troubleshooting & FAQs Managing surveys on your device Find & filter: Open the Surveys tab to filter by status ( Not Scanned , Needs Attention , Ready to Send , Sent ), toggle between Gallery and List views, or use the Search tab to find a postcode or customer name Edit details: Open a survey, tap ... > Edit Details , make your changes, and tap the blue tick Delete surveys: Open a survey and tap ... > Delete Survey (or tap ... > Select Surveys on the Surveys tab to bulk delete) . Surveys already marked Sent remain safely in your Heatpunk web account when deleted from your phone             Warning: Deleting a survey that has never been sent to Heatpunk permanently erases it—always upload your survey first . FAQs ​ Expand the sections below for information on common scanning, sending, and account questions ❓Two rooms merged into one during a LiDAR scan Wide openings between spaces or very cluttered floors can cause two rooms to read as one . Fix this on the floor plan by resizing the room in the Room Editor , or close the door between the rooms and re-scan them separately . ❓The floor plan looks slightly skewed Scans can occasionally drift by a degree or two, and the app automatically straightens slight offsets . Deliberately angled walls (such as bay windows) are left angled on purpose . If a room is still slightly off-square, select it on the floor plan and tap Square Up on the room card . ❓Inner walls are missing when I open the project on the Heatpunk website Your rooms uploaded properly—the web floor plan simply calculates internal partition walls after a room is adjusted . On the Heatpunk website's floor plan, drag any room slightly and drop it back into place; all internal walls will appear . ❓The stop button stays grey during a LiDAR scan The scan requires at least 3 walls to be detected before the stop button activates . Keep sweeping the camera slowly around the room until 3 walls have been captured .   ❓The app says "Key not accepted" or asks me to "Reconnect" Your device key was removed on the website or your Pro subscription ended . Generate a new QR code under My Account > Preferences > Heatpunk App on a computer, then open Settings in the app and tap Reconnect . Your existing surveys remain safely on your phone . ❓I got a new phone First, send any unsent surveys from your old phone—they are stored locally on that device and are not in Heatpunk yet . Then log in to the Heatpunk website, click Remove next to your old phone under Your devices , and generate a new QR code to connect your new phone . Reporting issues & contacting support In-app tips: Go to Settings > Help & Support > Getting a Clean Scan > Show Me for a quick 6-step refresher Send Feedback / Report a Bad Scan: In Settings > Help & Support , tap Send Feedback (to attach diagnostic logs) or Report a Bad Scan (to attach the raw scan .zip file) . Neither report includes customer personal details Email Support: Contact help@heatpunk.co.uk with your account email, survey Reference ( #HP-... ), device model, and the app Version (found in Settings ) ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.