1. Getting started & connecting your device To survey properties on site using the Heatpunk App, you first need to install it and link it to your Heatpunk Pro account . You only need to do this once per device . What you need A Heatpunk Pro account: The app can only connect and send surveys to a Heatpunk Pro account An iPhone or iPad: Running iOS 26 or later. (Note: LiDAR Scan requires an iPhone 12 Pro or newer Pro model, or an iPad Pro . All other compatible iPhones can use AR Measure ) A device passcode: Required so the app can securely store your account key A computer: To log into the Heatpunk web portal and generate your connection QR code Internet connection: Required only to connect the app and upload completed surveys . You can carry out full surveys completely offline Note: You can connect up to 2 devices to a single Heatpunk account . 1. Download the app & allow permissions Open the App Store on your iPhone or iPad, search for Heatpunk , and tap Get . Open the app and tap Allow when prompted for Camera access (required to scan rooms and read your QR code) . When prompted later during surveys, allow Microphone and Speech Recognition (to dictate room notes — recordings stay locally on your phone) and Photos (to save floor plan images) . 2. Generate your QR code on a computer Log in to heatpunk.co.uk  on a computer and go to My Account > Preferences > Heatpunk App . Under Set up the app , enter a name for your device (e.g., Survey iPhone 1 ), click Get QR code , and click OK . Keep the Connect Heatpunk QR code window open on your screen . Warning: Your QR code is displayed only once . Do not share it, as anyone who scans it can view and edit your projects .   3. Scan the code to connect On the app's Connect to Heatpunk screen, tap the round blue QR button at the bottom right . Point your camera at the QR code on your computer screen . Once verified, the app will automatically open the Home screen . You can now click Done on your computer . ​ Expand the sections below for information on issues related to connecting your device Already have 2 devices connected? If the website says "You can add up to 2 devices," go to Your devices on the website and click Remove next to a device you no longer use . That device will no longer be able to send surveys until you reconnect it with a new QR code . What if the app shows a red error message when connecting? "That QR code isn't a Heatpunk key.": You scanned a different QR code—point the camera at the code under My Account > Preferences > Heatpunk App on the website "Heatpunk did not accept this key.": The code was removed or already used—generate a new QR code on the website and scan it "Connecting needs a connection.": Your device has no signal—try again once you have mobile signal or Wi-Fi "Set a passcode on this iPhone to connect.": Add a device passcode in your iPhone's Settings , then generate and scan a new QR code "Camera access is off.": Turn on camera access in your device's Settings > Heatpunk , then try again Navigating the Home screen & Settings Tabs: Switch between Home , Surveys , and Search at the bottom of the screen (or via the sidebar on iPad) Start a survey: Tap + at the top right to begin a new survey Settings: Tap the gear icon at the top right to check your connection status, set your default Ceiling Height (2400 mm default), toggle Snap Walls Square , manage iCloud Copy backups, or tap Clear Scans Already Sent to free up phone storage       Not backed up to iCloud? If your Home screen shows Not Backed Up to iCloud , your surveys are stored only on your phone . Tap the card to open your iCloud Copy settings . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.