2. Starting a new survey Before scanning rooms, set up the property details, measurement method, and ventilation settings . 1. Create the survey From the Home screen, tap + (or + New Survey ) . Enter the full UK postcode (e.g., CB24 1AB ) . This is the only mandatory field to begin . Optionally enter the Address , Project Name (defaults to the postcode if left blank), Customer contact details, and the House Built era ( Before 2000 , 2000-2006 , or After 2006 ) . Tap Start at the top right . 2. Choose your measurement method You choose one measurement method for the entire survey, then tap the blue arrow at the bottom right to continue . ​ Expand the sections below for information on which measurement mode to choose LiDAR Scan (iPhone Pro & iPad Pro) Compatible devices: iPhone 12 Pro or later Pro models, and iPad Pro How it works: Walk slowly around each room (~1 minute per room); walls, doors, windows, and a 3D model are detected automatically Best for: Most rooms that are quick, furnished, and have ordinary shapes Watch out for: Mirrors, large expanses of glass, and very dark rooms AR Measure (Any compatible iPhone) Compatible devices: Any compatible iPhone How it works: Aim the screen ring at and tap each floor corner, ceiling height, door, window, and radiator (2–3 minutes per room) Best for: Lofts, awkward shapes, rooms a LiDAR scan gets wrong, and phones without LiDAR Watch out for: Plain shiny floors and dim lighting 3. Pick your starting floor Select the floor you want to survey first ( Ground floor is selected by default, though you can scan floors in any order) . Skip Attic unless it is a converted habitable space, and only select Basement if it is heated . Once the green Sensor ready (or Camera ready ) indicator appears, tap Start . 4. Complete Before You Start Configure these four settings before the camera opens : Property type: Tap Property type and pick Detached , Semi-detached , End of terrace , Mid-terrace , or Flat (used locally to prompt you for shared party walls) . Materials palette: Tap Materials palette and select one of your Heatpunk account palettes or Blank palette (standard materials) . Ventilation losses: Tap Ventilation losses , choose Standard (MCS) (12 m³/(h·m²) at 50 Pa) or Measured Air Permeability (if an air tightness test was performed), select the wind shelter ( Intensive , Normal , or None ), and tap the blue tick . When to Survey the Outside: Choose Before the Rooms to answer external survey questions first (Property Details, Access, Heat Pump Location, Wiring, and Pipe runs), or After the Rooms to jump straight into scanning . Tap Start (or Start Scanning if you completed outside questions first) to begin .         Warning: If the app warns that your phone has less than 1 GB of free space, clear some storage before scanning or you risk losing what you record . ​ Still Need Help? Contact Support:  If you've got further questions, get in touch with our support team at  help@heatpunk.co.uk  (UK) or  help@heatpunk.ie  (IE).  If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.