5. Editing the floor plan & aligning floors

You can view and refine your floor plan at any time by tapping the Plan (map) icon during a room walk, or tapping Open next to Floor Plan on the survey's page. 


Understanding floor plan colours

Screenshot_20261119_134351.png

Moving, rotating & squaring up rooms

Screenshot_20261119_134409.png

Editing a room's shape & wall boundaries

  1. Select a room and tap Edit to open the Room Editor.

  2. Reshape walls: Drag pink corner squares (fixed angle), pink circles (free angle), or pink wall bars. Drag a small teal dot to add a new corner, or tap any wall length to type an exact measurement in mm.
  3. Set What's Behind each wall: Tap a wall (or open Walls in the card list) and set What's Behind to Outside, Heated, Unheated (e.g., an attached garage), Ground, or Neighbour's Home (essential for semi-detached and terraced party walls).
  4. Tap the blue tick at the top right to save.
What do the different "What's Behind" wall options mean?
  • Outside: The wall is an external wall (this is the default for unshared walls)
  • Heated: Another heated space is on the other side
  • Unheated: An unheated space is on the other side, such as an attached garage
  • Ground: Earth is on the other side, such as a basement retaining wall
  • Neighbour's Home: The wall is a party wall shared with an adjoining property—be sure to set this on semi-detached or terraced houses so Heatpunk does not treat it as an external heat-loss wall

Screenshot_20261119_134429.png                          download.gif

Adding or editing doors, windows & radiators

Screenshot_20261119_134503.png

Lining up multiple floors

If the property has two or more floors, you must align them before sending the survey.

  1. Open the floor plan with no room selected and tap Line Up (or select ... > Line Floors Up on the survey page).
  2. Tap Auto Align to snap the upper floor over the floor below (shown in blue).
  3. Fine-tune using drag, Nudge 50 mm, or Rotate if needed.
  4. Tap Aligned at the top right.

Warning: Always tap Aligned rather than Back when you finish aligning floors—tapping Back keeps your position changes but will not mark the floors as aligned for upload.


​Still Need Help?

Contact Support: If you've got further questions, get in touch with our support team at help@heatpunk.co.uk (UK) or help@heatpunk.ie (IE). If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.


Revision #11
Created 19 November 2026 10:48:22 by Phoenix Tashlin
Updated 19 November 2026 14:44:26 by Phoenix Tashlin