Emitters

Emitters are added to a project in the Plan task . Here you can model existing emitters and any necessary upgrades. 

 Add existing emitters to the  surveyed plan and adjust the flow temperature on the right-hand sidebar to clearly see where upgrades are needed. On a design option you can then model these emitter upgrades .  

 Below is a short video demonstrating how to add and upgrade radiators and underfloor heating.  

 

 Emitters tab 

 As you build your floor plan, you can access a range of controls and details in the Emitters tab: 

 

 

 View heat loss information per floor and navigate between floors

 

 Emitter output : total floor emitter output / total floor heat loss 

 Sufficient rooms : no. of rooms where heat loss is met / no. of rooms where heat loss is not met 

 

 

 Hover over the 🛈 icon next to Emitters to view the total emitter output and annual demand for the property  

 For new or existing emitters, click ⋯ three dots to edit details or delete. On removed emitters click the ⋯ three dots > Restore emitter to add it back to the design option 

 Each room displays whether the heat loss is met and the  room emitter output / room heat loss  

 Click 🡥 to see room details  to add other emitters or view the room annual demand, element heat loss, volume and area.  

 Click the exclamation icon to override the heat loss  for that room 

 

 Edits to existing emitters from the Emitters tab apply to all plans. Read about emitter upgrades below.  

 While on the Emitters tab, as you adjust the flow temperature , you can see directly on the floor plan whether the heat loss is being met:  

 

 UFH and other non-radiator emitters have a fixed output that does not change with flow temperature in Heatpunk. As seen above, the living room output remains the same.  

 Adding emitters 

 You can add emitters in both the surveyed plan and design options. Emitters added to the surveyed  plan will be added to all design options, while emitters added within a design option are only added to that option. 

 Adding radiators

 

 To place radiators on a floor plan, drag and drop from the right-hand sidebar.  

 

 Click on the radiator to edit the type and size or remove from the plan. If the type you are looking for isn't listed, click  Add Material to add radiators to your material library .  

 

 Adding underfloor heating or other emitters  

 To add underfloor heating, navigate to the Emitters tab and click 🡥 See room details   on the room. Below the room details, then click  Add underfloor heating or  Add other emitters . Fill in the details and then save changes.  

 

 Emitter upgrades 

 To complete emitter upgrades, make sure you have a design option selected. When you add, upgrade, or remove emitters, this is clearly labelled for each room:  

 

 

 Existing : emitters added to the surveyed plan 

 Removed : existing emitters deleted or replaced on a design option 

 New : emitters added to a design option 

 

 If a radiator you've added is of the wrong type, remove the radiator, navigate to the correct floor plan (surveyed plan or a design option) and re-add the radiator.  

 

 Radiator upgrades 

 Click on the radiator on the plan and then click upgrade.  

 

 You can then edit the details of the existing emitter. 

 

 Clicking  Save changes  will delete the existing radiator from the floor plan and replace it with the new radiator.  

 

 Underfloor heating and other emitters upgrades 

 If you are replacing the radiator with underfloor heating (or another emitter), delete the radiator from the plan and follow the steps above to add UFH/other emitters to a project.  

 Overriding heat loss 

 To override the heat loss on a room, click the exclamation icon. Input the reason for the override and save. That text will then display in the technical report.  

 

 The text will also appear on the floor plan. To view the full text, click  🡥 See room details . 

 

 If you have further questions, please get in touch at help@heatpunk.co.uk  or  help@heatpunk.ie .