Sources

Adding a heat pump  

 

 Heat pumps are added to a design within the Plan task . 

 While on a design option , drag and drop a Pump from the left-hand sidebar to place a heat pump in the plan. After placing the heat pump, you can select the model. Choose from the recommendations or scroll through the sections on the left, sorted by brand and type (monoblock and split). 

 When a heat pump is selected, on the right you will see specs, and Midsummer stock levels and pricing. If your account is connected to Midsummer , you will also see your specific pricing.  

 Sources tab 

 On the  Sources  tab, you will see: 

 

 

 Total heat pump output / maximum demand 

 Sound check information (UK only): choose sound check method and complete sound check for each heat pump 

 Outside design temperature (ODT) settings 

 Details of selected heat pumps 

 

 Heat pumps 

 

 To edit or delete the selected heat pump(s), either delete directly from the design option floor plan or navigate to the Sources  tab where you can:  

 

 

 

 

 

 Edit heat pump 

 Re-open the heat pump selector menu to change the heat pump.  

 

 

 

 

 

 

 

 Show all details 

 Show/hide the nominal capacity and ENA registration number.  

 

 

 

 

 

 

 

 Sound check 

 Complete sound check for this heat pump. Read more about this below.  

 

 

 

 

 

 Delete heat pump 

 Remove heat pump from this design option. 

 

 

 

 

 For each heat pump, you can see: 

 

 Model 

 Sound power level (dB) 

 SCOP at flow temperature 

 Output at flow temperature 

 

 On the heat pump, click  ⋯ (three dots)  >  Show all details to also display the nominal capacity and ENA registration number (UK). 

 Adjust the flow temperature at the top of the right-hand sidebar: 

 

 Completing the sound check (UK only) 

 Once you have added a heat pump, you can complete the sound check for that heat pump. On the Sources tab, where it says  sound check incomplete , click the ⋯ (three dots) and then the name of the heat pump(s).  

 

 Once you have completed the sound check for all heat pumps in the design option, the result will be displayed in the same section: 

 

 Sound checks on multiple heat pumps can only be completed using MCS 020 a) (2025 method). Read more about the sound check .  

 Editing ODT settings 

 To change the ODT for the project, select ⚙ Outside design temperature  next to heat pumps :  

 

 Read more about ODT in Heatpunk .  

 

 If you have further questions, please get in touch at help@heatpunk.co.uk  or  help@heatpunk.ie .