Skip to main content

Scanning & measuring rooms (LiDAR & AR)

Each room is measured one at a time and automatically joins onto your floor plan. 


Tips for a clean scan

  • Close internal doors and turn on lights: Open doors can cause LiDAR to merge two rooms into one

  • Ignore furniture: Sofas, tables, and kitchen units are automatically filtered out—only walls, doors, windows, and radiators are sent to Heatpunk
  • Keep the phone held up between rooms: Moving with the camera upright helps the app track your position so the next room snaps neatly beside the previous one

Method A: Scanning with LiDAR

  1. Stand close to a wall, point the phone at it, and tap the round blue button at the bottom.

  2. Walk slowly around the perimeter (roughly one step per second), sweeping the camera from floor to ceiling across every wall, door, and window.
  3. Mark radiators (optional): Tap directly on any radiator on your screen while scanning to place a marker on the nearest wall.
  4. Once you have scanned all walls (and at least 3 walls are detected), tap the round blue button again to finish and open the Room Steps.

Method B: Measuring with AR Measure

  1. Move your phone slowly over the floor until the dotted grid appears.

  2. Aim the centre ring at a floor corner and tap Corner. Repeat around the room, then aim back at the first corner and tap Corner again to close the room.
  3. Set Ceiling Height: Switch to the Height tab, aim where a wall meets the ceiling above a corner, and tap Set (or tap Same as last room).
  4. Add Doors, Windows & Radiators: Use the Door, Window, and Radiator tabs at the bottom to aim and tap opposite corners or edges for each opening or radiator.
  5. Tap Done at the top right (use Undo at the top if you misplace a point).

Moving between rooms & troubleshooting

  • Next room or floor: After completing a room's steps, tap Next Room to keep scanning, or tap More > Next Floor when a floor is finished
  • Rescan or add a missed room: Tap ... > Rescan Room or ... > Add a Missed Room

​Still Need Help? / Want to know more?

Contact Support: If you've got further questions, get in touch with our support team at help@heatpunk.co.uk (UK) or help@heatpunk.ie (IE). If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.