Skip to main content

4. Completing room details, radiators & photos

Immediately after scanning a room, a 5-step card workflow opens at the bottom of the screen (or in the right-hand panel on iPad).


Room type, name & shape (Step 1 of 5)

  1. Room Type & Name: Tap Room Type and select the room's function (Heatpunk uses this to set design room temperatures; select Unheated if the room has no heating). Optionally add a Custom Name (e.g., Front Bedroom), then tap Continue.

  2. Check the Shape: Compare the room outline against the real room.
  3. Drag corner dots to adjust angles or wall dots to move walls, or tap a wall to type its exact length in mm.
  4. Tap Looks Right to continue.

Screenshot_20261119_134031.png

Radiators (Step 2 of 5)

Every radiator must have a measured size before you send the survey to Heatpunk.

  1. Tap + Add Radiator (or tap a radiator you marked during the LiDAR scan).
  2. Choose how to record its dimensions:

    • Tap the Radiator (LiDAR only): Point the camera at the middle of the radiator to auto-measure, then tap Use This

    • Tap Two Corners (LiDAR only): Aim at two opposite corners with the camera
    • Enter Manually: Select the wall, pick the radiator type, and enter Width and Height in mm
  3. Tap Add Photo on the radiator row to photograph the TRV, lockshield, pipe tails, and any nearby plug socket.
  4. Tap Continue (swipe left on a radiator row to Delete it).

Screenshot_20261119_134047.png

Warning: Every radiator must have a measured size before you send the survey—Heatpunk will leave out any radiator that has no size.

In This Room (Step 3 of 5)

  1. Verify the Ceiling Height in mm.

  2. If applicable, tap Stopcock is here or Boiler is here to take a photo.
  3. If the scan detected a fireplace, specify whether its chimney is open (No flue, Flue with a throat, or Flue with no throat).
  4. Answer any room-specific prompts (such as vents, hot water cylinder, or consumer unit) by tapping Here (to take a photo) or Not Here, then tap Continue.

Screenshot_20261119_134058.png

Photos & Notes (Steps 4 & 5 of 5)

  1. Photos (4 of 5): Tap Take Photos to capture general room photos, then tap Done.

  2. Notes (5 of 5): Type notes into the text box, or tap Tap to Dictate to record a voice note.
  3. Tap Done to finish the room, then select Next Room or More.

Screenshot_20261119_134119.png

Need to skip a step? You can tap Skip on Steps 2–5 to come back later. Any skipped items are automatically flagged in Before You Leave before you upload the survey.


​Still Need Help? / Want to know more?

Contact Support: If you've got further questions, get in touch with our support team at help@heatpunk.co.uk (UK) or help@heatpunk.ie (IE). If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.