Skip to main content

5. Editing the floor plan & aligning floors

You can view and refine your floor plan at any time by tapping the Plan (map) icon during a room walk, or tapping Open next to Floor Plan on the survey's page. 


Understanding floor plan colours

  • Thick black wall: External wall (heat loss boundary)
  • Thin grey wall: Internal partition wall between two scanned rooms
  • Dark blue line: Door
  • Light blue line: Window
  • Orange edge: Room still needing a Room Type
  • Orange bar: Radiator (solid once sized; pale and dashed if unmeasured)

Moving, rotating & squaring up rooms

  • Move a room: Tap a room to select it, then drag inside it—it will snap automatically to neighbouring rooms

  • Rotate a room: Drag the round blue handle above a selected room, or tap Square Up on the room card to straighten walls that are slightly off-square
  • Move multiple rooms: Tap Select at the top right, tap each room you want to group, and drag or rotate them together
  • Rotate the whole floor: With no room selected, use Rotate or Turn 90° on the bottom card

Editing a room's shape & wall boundaries

  1. Select a room and tap Edit to open the Room Editor.

  2. Reshape walls: Drag pink corner squares (fixed angle), pink circles (free angle), or pink wall bars. Drag a small teal dot to add a new corner, or tap any wall length to type an exact measurement in mm.
  3. Set What's Behind each wall: Tap a wall (or open Walls in the card list) and set What's Behind to Outside, Heated, Unheated (e.g., an attached garage), Ground, or Neighbour's Home (essential for semi-detached and terraced party walls).
  4. Tap the blue tick at the top right to save.

Adding or editing doors, windows & radiators

  • Add: Select a room, tap + Add, and choose Door, Window, or Radiator. Enter the dimensions and wall, then drag it into position

  • Edit: Select a room, tap the door, window, or radiator on the plan, and use the card to adjust dimensions, toggle Plug socket nearby (for radiators), or nudge its position in 10 mm increments
  • Add a missed room: With no room selected, tap Add Room, choose the room type, and select Scan It (LiDAR), Measure with Taps (AR), or Enter Size (manual rectangle)

Lining up multiple floors

If the property has two or more floors, you must align them before sending the survey.

  1. Open the floor plan with no room selected and tap Line Up (or select ... > Line Floors Up on the survey page).
  2. Tap Auto Align to snap the upper floor over the floor below (shown in blue).
  3. Fine-tune using drag, Nudge 50 mm, or Rotate if needed.
  4. Tap Aligned at the top right.

​Still Need Help? / Want to know more?

Contact Support: If you've got further questions, get in touch with our support team at help@heatpunk.co.uk (UK) or help@heatpunk.ie (IE). If you are experiencing a bug, to help us look into your issue faster, please include the email address of your account, the name of the project and screenshots of any unexpected behaviour.