Emitters

[emitters tab intro, with sidebar diagram covering sections below]

Existing emitters should be added to the Surveyed plan. Radiator upgrades should be completed on design options. 

Adding radiators 

Drag and drop, edit gif 

Adding underfloor heating or other emitters 

To add underfloor heating, navigate to the Emitters tab > 🡥 See room details for the room where you're adding UFH or other emitters. 

For other emitters, specify the name and the output: 

UFH and other non-radiator heat emitters have a fixed output that does not change with the flow temperature in Heatpunk. Make sure the output is correct for the chosen flow temperature. 

Emitter upgrades

Radiator upgrades

Click on the radiator on the plan and then click upgrade. 

This menu will then pop up where you can edit the details of the existing emitter.

Clicking Save changes will delete the existing radiator from the floor plan and replace it with the new radiator. 

Underfloor heating and other emitters upgrades

If you are replacing the radiator with underfloor heating (or another emitter), delete the radiator from the plan and follow the steps above to add UFH/other emitters to a project. 

Overriding heat loss

To override the heat loss on a room, click the exclamation icon next to the 🡥 icon. Input the reason for the override and save. 

The text will then appear on the floor plan. To view the full text, click 🡥 See room details.