Skip to main content

How do I change the Outdoor Design Temperature (ODT) for my project?

​heatpunk.co.ukThis guide applies to Heatpunk UK. 


To change the ODT, follow these steps:

Note this will not affect the Outdoor Low Temperature (ODL) used in the performance task. Read here for more information. 

  1. Navigate to the Plans task for your project.
  2. Click the 3 dots in the top right hand corner to view more options. Select temperature configuration.  

    image.png

  3. You can choose between postcode lookup (default option, recommended for most accurate result), zone lookup or a custom ODT (for extreme environments). 

    image.png

  4. If postcode or zone lookup are selected, you can use the toggle to change between the 99th (default option) or 99.6th percentile. This means that the ODT will not be lower than this value 99% or 99.6% of the time, respectively. 

    image.png

Find out more about the ODT and how it is automatically set here.

Find out more about how to choose between the 99th or 99.6th percentile ODT here.

Note that the Channel Islands Jersey and Guernsey do not have a CISBE zone, so the zone lookup method will not be suitable. The postcode lookup method will work even if the Islands are not shown on the map. 

An additional 0.3°C will need to be removed for every 50 m above sea level, with altitude given in the input section of the technical report & customer proposal.